怎么用Java语言对接智能红外遥控器

2023-05-17 发布浏览：227 次

本文介绍了如何用 Java 对接智能红外遥控器的方法：可以通过接口实现。

智能红外遥控器

更多...

支持命令

开关	power
模式	mode
温度	degree
风速	speed
风向	swing
蜂鸣	beep
灯光	light

产品手册

版本	对应产品手册
红外遥控器	《智能红外遥控器产品手册》
空调遥控器	《智能空调遥控器产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

/*首先，确保在你的项目中添加了 unirest 的 Maven 依赖。如果你使用的是 Maven，可以在 pom.xml 中添加以下依赖：
<dependency>
    <groupId>com.konghq</groupId>
    <artifactId>unirest-java</artifactId>
    <version>3.13.10</version>
</dependency>
*/

import com.konghq.unirest.http.HttpResponse;
import com.konghq.unirest.http.Unirest;
import com.konghq.unirest.http.exceptions.UnirestException;
import org.apache.commons.codec.digest.DigestUtils;

public class Main {
    public static void main(String[] args) {
        // 定义变量
        String AppID = "开发者ID"; // 替换为实际的 AppID
        String AppSecret = "开发者密码"; // 替换为实际的 AppSecret
        long ts = System.currentTimeMillis() / 1000; // 获取当前时间戳（秒）

        // 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
        String sign = DigestUtils.md5Hex(DigestUtils.md5Hex(AppSecret) + ts);

        // 构建 URL
        String url = String.format("https://api.thingboot.com/%s/device/control/?sign=%s&ts=%d", AppID, sign, ts);

        // 请求体数据
        String device = "1878"; // 替换为实际的设备ID；可传多个[用,间隔]
        String order = "{\"power1\":1}"; // 替换为实际的命令

        try {
            // 构建请求体
            String postData = String.format("{\"device\":\"%s\",\"order\":%s}", device, order);

            // 发送 POST 请求
            HttpResponse<String> response = Unirest.post(url)
                    .header("Content-Type", "application/json")
                    .body(postData)
                    .asString();

            // 输出响应
            System.out.println(response.getBody());
        } catch (UnirestException e) {
            e.printStackTrace();
        }
    }
}

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

/*
首先，确保在你的项目中添加了 OkHttp 的 Maven 依赖。如果你使用的是 Maven，可以在 pom.xml 中添加以下依赖：
<dependency>
    <groupId>com.squareup.okhttp3</groupId>
    <artifactId>okhttp</artifactId>
    <version>4.9.3</version>
</dependency>
*/

import okhttp3.*;
import org.apache.commons.codec.digest.DigestUtils;

import java.io.IOException;

public class Main {
    public static void main(String[] args) {
        // 定义变量
        String AppID = "开发者ID"; // 替换为实际的 AppID
        String AppSecret = "开发者密码"; // 替换为实际的 AppSecret
        long ts = System.currentTimeMillis() / 1000; // 获取当前时间戳（秒）

        // 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
        String sign = DigestUtils.md5Hex(DigestUtils.md5Hex(AppSecret) + ts);

        // 构建 URL
        String url = String.format("https://api.thingboot.com/%s/device/control/?sign=%s&ts=%d", AppID, sign, ts);

        // 请求体数据
        String device = "1878"; // 替换为实际的设备ID；可传多个[用,间隔]
        String order = "{\"power1\":1}"; // 替换为实际的命令

        // 构建请求体
        String postData = String.format("{\"device\":\"%s\",\"order\":%s}", device, order);

        // 创建 OkHttpClient 实例
        OkHttpClient client = new OkHttpClient();

        // 创建请求体
        MediaType mediaType = MediaType.parse("application/json; charset=utf-8");
        RequestBody body = RequestBody.create(postData, mediaType);

        // 创建请求
        Request request = new Request.Builder()
                .url(url)
                .post(body)
                .addHeader("Content-Type", "application/json")
                .build();

        // 发送请求并处理响应
        try (Response response = client.newCall(request).execute()) {
            if (!response.isSuccessful()) throw new IOException("Unexpected code " + response);

            // 输出响应
            System.out.println(response.body().string());
        } catch (IOException e) {
            e.printStackTrace();
        }
    }
}

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。

怎么用Java语言对接智能红外遥控器

智能红外遥控器

支持命令

产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

文章：

怎么用Java语言对接智能红外遥控器

相关技术文章：

怎么用Java语言对接空调远程指令发送器2

如何用Java语言对接24 路智能分体远程多通道控制器

如何用Java语言控制20W 物联网语音广播音箱

怎样用Java语言控制智能Mini语音喇叭

怎样用Java语言对接10W壁挂语音通知音箱

Please contact me

智能红外遥控器

支持命令

产品手册

HTTP接口控制 以设备控制（向设备下发命令）为例

文章：

怎么用Java语言对接智能红外遥控器

相关技术文章：

怎么用Java语言对接空调远程指令发送器2

如何用Java语言对接24 路智能分体远程多通道控制器

如何用Java语言控制20W 物联网语音广播音箱

怎样用Java语言控制智能Mini语音喇叭

怎样用Java语言对接10W壁挂语音通知音箱

HTTP接口控制以设备控制（向设备下发命令）为例