如何用Python语言对接智能交流控制器4路

2022-10-01 发布浏览：458 次

本文介绍了如何用 Python 对接智能控制器4路|交流电压版的方法：可以通过接口实现4路独立交流线路控制、远程指令开关控制、定时自动启停控制、联动场景逻辑控制、负载状态反馈控制、分路权限管理控制、交流负载通断控制、多设备联动控制。

智能控制器4路|交流电压版

提供4路交流10A输出，可接照明、电器等；

广泛应用于共享自习室、共享设备改造等场景；

同时提供4路开关量信号输入，可外接轻触开关；

4路分控，均可通过HTTP接口远程独立控制通断；

支持远程定时任务，支持自定义联动操作；

更多...

适用场景

智能家居照明设备控制、共享场所交流负载管理、智能办公交流电路控制、安全节能交流设备管理、LED灯光系统交流控制、家电设备电源管理、安防设备交流电路控制、物联网设备供电管理、实验室交流负载控制、自动化设备交流电源管理中

支持命令

线路1	power1
线路2	power2
线路3	power3
线路4	power4
批量控制	batch
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册
内置天线	《智能交流控制器4路产品手册》
外置天线	《智能交流控制器4路产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

# First you need to prepare the following values
# 1. AppID (in your console development settings)
# 2. AppSecret (in your console development settings)
# 3. ts (timestamp of the current time, seconds)
# 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
# In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
# Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
# Request needs to pass two parameters device and order:
# device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
# order[json string]: the command to be issued, for example:
# {"power":1}, usually to connect the circuit of the switch
# {"power3":0}, usually to close the third line of the switch or controller
# {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
# The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
# Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

import hashlib
import json
import http.client
import time
from urllib.parse import urlencode

def calculate_md5(s):
    return hashlib.md5(s.encode()).hexdigest()

def send_request():
    app_id = "开发者ID"  # 替换为实际的 AppID
    app_secret = "开发者密码"  # 替换为实际的 AppSecret
    ts = int(time.time())  # 获取当前时间戳（秒）

    # 计算签名  md5(md5(开发者密码)拼接上面的ts参数)
    sign = calculate_md5(calculate_md5(app_secret) + str(ts))

    # 构建 URL
    base_url = f"https://api.thingboot.com/{app_id}/device/control/"
    params = {
        "sign": sign,
        "ts": ts
    }

    # 构建请求体数据
    device = "1878"  # 替换为实际的设备ID；可传多个[用,间隔]
    order = {"power1": 1}  # 替换为实际的命令

    request_body = {
        "device": device,
        "order": order
    }

    json_body = json.dumps(request_body)

    # 创建请求
    conn = http.client.HTTPSConnection("api.thingboot.com")
    headers = {
        "Content-Type": "application/json"
    }

    # 发送请求
    conn.request("POST", f"/{app_id}/device/control/?{urlencode(params)}", json_body, headers)

    # 获取响应
    response = conn.getresponse()
    response_data = response.read().decode('utf-8')

    print("Response Status Code:", response.status)
    print("Response Body:", response_data)

    conn.close()

# 调用函数
send_request()

# First you need to prepare the following values
# 1. AppID (in your console development settings)
# 2. AppSecret (in your console development settings)
# 3. ts (timestamp of the current time, seconds)
# 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
# In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
# Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
# Request needs to pass two parameters device and order:
# device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
# order[json string]: the command to be issued, for example:
# {"power":1}, usually to connect the circuit of the switch
# {"power3":0}, usually to close the third line of the switch or controller
# {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
# The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
# Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

import hashlib
import json
import requests
import time
from urllib.parse import urlencode

def calculate_md5(s):
    return hashlib.md5(s.encode()).hexdigest()

def send_request():
    app_id = "开发者ID"  # 替换为实际的 AppID
    app_secret = "开发者密码"  # 替换为实际的 AppSecret
    ts = int(time.time())  # 获取当前时间戳（秒）

    # 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
    sign = calculate_md5(calculate_md5(app_secret) + str(ts))

    # 构建 URL
    base_url = f"https://api.thingboot.com/{app_id}/device/control/"
    params = {
        "sign": sign,
        "ts": ts
    }

    # 构建请求体数据
    device = "1878"  # 替换为实际的设备ID；可传多个[用,间隔]
    order = {"power1": 1}  # 替换为实际的命令

    request_body = {
        "device": device,
        "order": order
    }

    # 发送请求
    response = requests.post(
        base_url,
        params=params,
        json=request_body,
        headers={"Content-Type": "application/json"}
    )

    # 输出响应
    print("Response Status Code:", response.status_code)
    print("Response Body:", response.text)

# 调用函数
send_request()

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。

如何用Python语言对接智能交流控制器4路

智能控制器4路|交流电压版

适用场景

支持命令

产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

文章：

如何用Python语言对接智能交流控制器4路

相关技术文章：

怎样用Python语言对接AC1-10A带电量统计智能开关

怎样用Python语言对接吸顶式人体活动监测器

怎么用Python语言控制智能壁挂Pro远程语音喇叭

怎么用Python语言控制智能广播喇叭 3

怎样用Python语言控制4400W 线路控制器

Please contact me

智能控制器4路|交流电压版

适用场景

支持命令

产品手册

HTTP接口控制 以设备控制（向设备下发命令）为例

文章：

如何用Python语言对接智能交流控制器4路

相关技术文章：

怎样用Python语言对接AC1-10A带电量统计智能开关

怎样用Python语言对接吸顶式人体活动监测器

怎么用Python语言控制智能壁挂Pro远程语音喇叭

怎么用Python语言控制 智能广播喇叭 3

怎样用Python语言控制4400W 线路控制器

HTTP接口控制以设备控制（向设备下发命令）为例

怎么用Python语言控制智能广播喇叭 3