如何用Java语言控制机柜智能插排(5位)

2022-09-15 发布浏览：239 次

本文介绍了如何用 Java 对接智能PDU[分控]|5位的方法：可以通过接口实现5路独立电源控制、远程控制5路电源、分路开关控制5台设备电源、集中控制5路设备电源、远程打开关闭5路设备电源、设备电源状态监测、机柜5路设备电源定时控制、远程开关状态查询、场景联动电源控制、多设备联动控制、远程批量开关控制、延时通断控制、设备运行状态监控、远程参数配置管理、故障告警通知、过流过载保护控制、设备分组控制、远程定时任务控制、自定义联动逻辑控制、线路状态反馈控制、设备电源批量管控、过流自动断电控制、5路设备电源状态监测。

智能PDU[分控]|5位

更多...

适用场景

智能机柜设备控制、机房设备电源控制、数据中心机柜管理、工业机柜电源管理、车间设备电源控制、弱电间设备管理、仓储设备电源控制、共享设备柜控制、自动售货柜电源控制、配电柜智能改造、产线设备控制、设备机房远程管理、数据中心服务器机柜电源管理、企业机房机柜设备电源控制、弱电间机柜设备电源管理、工业自动化机柜电源控制、通信机柜设备电源管理、实验室机柜设备电源控制、办公设备机柜电源管理、共享自习室设备机柜电源控制、共享棋牌室设备机柜电源管理、自助售货机柜电源控制、自助洗衣设备机柜电源管理、共享充电桩机柜电源控制、共享按摩椅设备机柜电源管理、共享设备机房机柜电源控制、产线自动化机柜电源管理、车间设备机柜电源控制、仓储设备机柜电源管理、设备运维机柜远程电源管理、智能仓储设备机柜电源控制、智能快递柜设备电源管理、自助服务终端机柜电源控制、广告机设备机柜电源管理、自助打印设备机柜电源控制、自助贩卖机柜电源管理、共享充电宝机柜电源控制、共享健身房设备机柜电源管理、共享台球室设备机柜电源控制、共享茶室设备机柜电源管理、共享麻将馆设备机柜电源控制、无人值守门店机柜电源控制、自助洗车设备机柜电源管理、共享充电站机柜电源控制、智慧教室设备机柜电源管理、培训机构设备机柜电源控制、图书馆设备机柜电源管理、创客工坊设备机柜电源控制、学校活动室设备机柜电源管理、培训教室设备机柜电源控制、酒店客房设备机柜电源管理、餐厅设备机柜电源控制、便利店设备机柜电源管理、银行网点设备机柜电源控制、医院设备机柜电源管理、展会现场设备机柜电源控制、活动现场设备机柜电源管理、景观亮化设备机柜电源控制、广告灯箱设备机柜电源管理、园区设备机柜电源控制、写字楼设备机柜电源管理、商场设备机柜电源控制、社区公共设备机柜电源管理、设备机房远程运维电源管理、数据中心机柜电源能耗管理、企业机房设备电源远程控制、工业机柜电源状态监测管理中

支持命令

线路1	power1
线路2	power2
线路3	power3
线路4	power4
线路5	power5
批量控制	batch

产品手册

版本	对应产品手册
黑色	《智能PDU5位[分控]产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

/*首先，确保在你的项目中添加了 unirest 的 Maven 依赖。如果你使用的是 Maven，可以在 pom.xml 中添加以下依赖：
<dependency>
    <groupId>com.konghq</groupId>
    <artifactId>unirest-java</artifactId>
    <version>3.13.10</version>
</dependency>
*/

import com.konghq.unirest.http.HttpResponse;
import com.konghq.unirest.http.Unirest;
import com.konghq.unirest.http.exceptions.UnirestException;
import org.apache.commons.codec.digest.DigestUtils;

public class Main {
    public static void main(String[] args) {
        // 定义变量
        String AppID = "开发者ID"; // 替换为实际的 AppID
        String AppSecret = "开发者密码"; // 替换为实际的 AppSecret
        long ts = System.currentTimeMillis() / 1000; // 获取当前时间戳（秒）

        // 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
        String sign = DigestUtils.md5Hex(DigestUtils.md5Hex(AppSecret) + ts);

        // 构建 URL
        String url = String.format("https://api.thingboot.com/%s/device/control/?sign=%s&ts=%d", AppID, sign, ts);

        // 请求体数据
        String device = "1878"; // 替换为实际的设备ID；可传多个[用,间隔]
        String order = "{\"power1\":1}"; // 替换为实际的命令

        try {
            // 构建请求体
            String postData = String.format("{\"device\":\"%s\",\"order\":%s}", device, order);

            // 发送 POST 请求
            HttpResponse<String> response = Unirest.post(url)
                    .header("Content-Type", "application/json")
                    .body(postData)
                    .asString();

            // 输出响应
            System.out.println(response.getBody());
        } catch (UnirestException e) {
            e.printStackTrace();
        }
    }
}

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

/*
首先，确保在你的项目中添加了 OkHttp 的 Maven 依赖。如果你使用的是 Maven，可以在 pom.xml 中添加以下依赖：
<dependency>
    <groupId>com.squareup.okhttp3</groupId>
    <artifactId>okhttp</artifactId>
    <version>4.9.3</version>
</dependency>
*/

import okhttp3.*;
import org.apache.commons.codec.digest.DigestUtils;

import java.io.IOException;

public class Main {
    public static void main(String[] args) {
        // 定义变量
        String AppID = "开发者ID"; // 替换为实际的 AppID
        String AppSecret = "开发者密码"; // 替换为实际的 AppSecret
        long ts = System.currentTimeMillis() / 1000; // 获取当前时间戳（秒）

        // 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
        String sign = DigestUtils.md5Hex(DigestUtils.md5Hex(AppSecret) + ts);

        // 构建 URL
        String url = String.format("https://api.thingboot.com/%s/device/control/?sign=%s&ts=%d", AppID, sign, ts);

        // 请求体数据
        String device = "1878"; // 替换为实际的设备ID；可传多个[用,间隔]
        String order = "{\"power1\":1}"; // 替换为实际的命令

        // 构建请求体
        String postData = String.format("{\"device\":\"%s\",\"order\":%s}", device, order);

        // 创建 OkHttpClient 实例
        OkHttpClient client = new OkHttpClient();

        // 创建请求体
        MediaType mediaType = MediaType.parse("application/json; charset=utf-8");
        RequestBody body = RequestBody.create(postData, mediaType);

        // 创建请求
        Request request = new Request.Builder()
                .url(url)
                .post(body)
                .addHeader("Content-Type", "application/json")
                .build();

        // 发送请求并处理响应
        try (Response response = client.newCall(request).execute()) {
            if (!response.isSuccessful()) throw new IOException("Unexpected code " + response);

            // 输出响应
            System.out.println(response.body().string());
        } catch (IOException e) {
            e.printStackTrace();
        }
    }
}

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。