怎么用Swift语言控制4 路共享设备控制模块

2026-05-24 发布浏览：669 次

本文介绍了如何用 Swift 对接智能照明控制器|4路的方法：可以通过接口实现4路独立线路控制、远程控制4路照明设备通断、定时开关照明设备电源、4路照明设备电源状态监测、分路控制灯光与电器、设备电源批量管控、远程定时任务、自定义联动操作、4 路独立线路控制、远程控制 4 路照明设备通断、4 路照明设备电源状态监测、远程开关状态查询、场景联动照明控制、多设备联动控制、远程批量开关控制、延时通断控制、设备运行状态监控、远程参数配置管理、故障告警通知、过流过载保护控制、设备分组控制。

智能照明控制器|4路

提供4路交流10A或16A输出，可接照明、电器等；

广泛应用于共享台球室、共享自习室、共享充电等场景；

同时提供4路开关量信号输入，可外接轻触开关；

4路分控，均可通过HTTP接口远程独立控制通断；

支持远程定时任务，支持自定义联动操作；

更多...

适用场景

智能家居、共享场所、智能办公、照明控制、共享台球厅、共享自习室、共享充电场景、居家照明控制、家庭智能改造、店铺照明设备控制、智能公寓照明控制、共享棋牌室照明管理、无人值守空间照明控制、弱电间照明联动、酒店客房照明控制、写字楼公共区域照明管理、学校教室照明控制、工厂车间照明管理、仓储仓库照明控制、园区路灯照明管理、展会现场照明控制、活动现场灯光管理、餐厅包厢照明控制、便利店照明管理、健身房区域照明控制、共享民宿照明管理、共享茶室照明控制、无人售货机灯光控制、自助设备照明管理、共享洗衣房照明控制中

支持命令

线路1	power1
线路2	power2
线路3	power3
线路4	power4
批量控制	batch
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册
联网方式:无线\|额定功率:10A	《智能照明控制器4路10A产品手册》
联网方式:无线\|额定功率:16A	《智能照明控制器4路16A产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

import Foundation
import CommonCrypto

func calculateMD5(string: String) -> String {
    let length = Int(CC_MD5_DIGEST_LENGTH)
    var digest = [UInt8](repeating: 0, count: length)
    if let data = string.data(using: String.Encoding.utf8) {
        _ = data.withUnsafeBytes { (bytes: UnsafeRawBufferPointer) -> Void in
            CC_MD5(bytes.baseAddress, CC_LONG(data.count), &digest)
        }
    }
    var digestHex = ""
    for index in 0..<length {
        digestHex += String(format: "x", digest[index])
    }
    return digestHex
}

func sendRequest() {
    let AppID = "开发者ID" // 替换为实际的 AppID
    let AppSecret = "开发者密码" // 替换为实际的 AppSecret
    let ts = Int(Date().timeIntervalSince1970) // 获取当前时间戳（秒）
 
    // 计算签名  md5(md5(开发者密码)拼接上面的ts参数)
    let sign = calculateMD5(string: calculateMD5(string: AppSecret) + String(ts))

    // 构建 URL
    let urlString = "https://api.thingboot.com/\(AppID)/device/control/?sign=\(sign)&ts=\(ts)"
    guard let url = URL(string: urlString) else {
        print("Invalid URL")
        return
    }

    // 请求体数据
    let device = "1878" // 替换为实际的设备ID；可传多个[用,间隔]
    let order = "{\"power1\":1}" // 替换为实际的命令

    // 构建请求体
    let postData = "{\"device\":\"\(device)\",\"order\":\(order)}".data(using: .utf8)!

    // 创建请求
    var request = URLRequest(url: url)
    request.httpMethod = "POST"
    request.setValue("application/json", forHTTPHeaderField: "Content-Type")
    request.httpBody = postData

    // 发送请求
    let task = URLSession.shared.dataTask(with: request) { data, response, error in
        if let error = error {
            print("Error: \(error.localizedDescription)")
            return
        }

        if let httpResponse = response as? HTTPURLResponse {
            print("HTTP Response Status Code: \(httpResponse.statusCode)")
        }

        if let data = data, let responseString = String(data: data, encoding: .utf8) {
            print("Response: \(responseString)")
        }
    }

    task.resume()
}

// 调用函数
sendRequest()

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。