怎样用Javascript语言控制DC-10A 智能电源开关

2022-10-13 发布浏览：620 次

本文介绍了如何用 Javascript 对接智能通断器DC-10A 的方法：可以通过接口实现HTTP 接口远程通断控制、单路直流负载控制、远程定时任务控制、自定义联动逻辑控制、线路状态反馈控制、按钮动作屏蔽控制、DC-10A 额定电流控制、低压直流负载通断控制、直流过流保护控制、低电压监测告警、远程开关状态查询、场景联动控制、设备运行状态监控、远程参数配置管理、多设备联动控制、延时通断控制、故障告警通知、电流超限保护控制、远程批量控制、设备休眠唤醒控制、短路保护控制。

智能通断器DC-10A

更多...

适用场景

智能家居低压设备控制、共享场所直流负载管理、智能办公直流电路控制、智能家居照明设备控制、共享场所交流负载管理、智能办公交流电路控制、安全节能交流设备管理、普通灯具系统交流控制、家电设备电源管理、安防设备交流电路控制、物联网设备交流供电管理、实验室交流负载控制、自动化设备交流电源管理、共享自习室灯光电源控制、共享茶室照明插座控制、共享棋牌室灯光设备控制、共享桌游室灯光空调控制、共享麻将馆灯光插座管理、自助洗车机电路控制、自助售货机电源管理、自助打印机电源控制、自助充电桩线路控制、自助洗衣设备电源管理、共享健身房灯光设备控制、智能家居低压设备控制、安全节能低压设备管理、LED 灯光系统直流控制、传感器设备电源管理、安防设备直流电路控制、物联网设备供电管理、实验室低压负载控制、自动化设备直流电源管理、共享自习室 LED 灯条控制、共享茶室氛围灯控制、共享桌游室低压灯光控制、共享麻将馆门禁信号控制、自助设备主板电源管理、自助售货机控制模块电源管理、共享健身房氛围灯控制、共享场馆低压灯光系统控制、共享民宿氛围灯控制、户外低压景观灯控制、园区标识牌电源管理、工业设备信号控制、智能锁直流电源控制、广告机直流供电管理、智能货架指示灯控制、充电桩信号回路控制、仓储设备指示灯管理、智能垃圾桶电源控制、智能快递柜信号控制、共享充电宝模块电源管理、自助咖啡机控制模块管理、无人值守设备电源控制中

支持命令

线路	power
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册
白色	《智能通断器DC-10A产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

// 定义变量
const AppID = '开发者ID'; // 替换为实际的 AppID
const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
const crypto = require('crypto');
const sign = crypto.createHash('md5').update(crypto.createHash('md5').update(AppSecret).digest('hex') + ts.toString()).digest('hex');

// 构建 URL
const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

// 构建请求体
const formData = new FormData();
formData.append('device', '1878');///替换成您需要发送的设备ID；可传多个[用,间隔]
formData.append('order', JSON.stringify({ power1: 1 })); //替换成您需要发送的指令

// 发送请求
fetch(url, {
    method: 'POST',
    body: formData
})
.then(response => response.json())
.then(data => console.log(JSON.stringify(data, null, 2)))
.catch(error => console.error('Error:', error));

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

const axios = require('axios');
const crypto = require('crypto');

// 定义变量
const AppID = '开发者ID'; // 替换为实际的 AppID
const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
const sign = crypto.createHash('md5').update(crypto.createHash('md5').update(AppSecret).digest('hex') + ts.toString()).digest('hex');

// 构建 URL
const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

// 构建请求体
const formData = new FormData();
formData.append('device', '1878');//替换成您需要发送的设备ID；可传多个[用,间隔]
formData.append('order', JSON.stringify({ power1: 1 })); //替换成您需要发送的指令

// 发送请求
axios.post(url, formData, {
    headers: {
        'Accept': '*/*',
        'Host': 'api.thingboot.com',
        'Connection': 'keep-alive',
        'Content-Type': 'multipart/form-data' // 必须设置 Content-Type
    }
})
.then(response => {
    console.log(JSON.stringify(response.data, null, 2));
})
.catch(error => {
    console.error('Error:', error);
});

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

<script>
	$(document).ready(function () {
		// 定义变量
		const AppID = '开发者ID'; // 替换为实际的 AppID
		const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
		const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

		// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
		const sign = CryptoJS.MD5(CryptoJS.MD5(AppSecret).toString() + ts.toString()).toString();

		// 构建 URL
		const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

		// 请求体数据
		const device = '1878'; // 替换为实际的设备ID；可传多个[用,间隔]
		const order = '{"power1":1}'; // 替换为实际的命令
		
		// 构建请求体
		const postData = {
			device: device, // 替换成您需要发送的设备ID；可传多个[用,间隔]
			order: order // 替换成您需要发送的指令
		};

		// 发送请求
		$.ajax({
			url: url,
			type: 'POST',
			data: formData,
			success: function (response) {
				console.log(JSON.stringify(response, null, 2));
			},
			error: function (xhr, status, error) {
				console.error('Error:', error);
			}
		});
	});
</script>

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

// 定义变量
const AppID = '开发者ID'; // 替换为实际的 AppID
const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
const sign = CryptoJS.MD5(CryptoJS.MD5(AppSecret).toString() + ts.toString()).toString();

// 构建 URL
const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

// 请求体数据
const device = '1878'; // 替换为实际的设备 ID；可传多个[用,间隔]
const order = '{"power1":1,"power2":1}'; // 替换为实际的命令

// 构建请求体
const postData = {
	device: device, // 替换成您需要发送的设备ID；可传多个[用,间隔]
	order: order // 替换成您需要发送的指令
};

// 创建 XHR 对象
const xhr = new XMLHttpRequest();

// 配置请求
xhr.open('POST', url, true);
xhr.setRequestHeader('Content-Type', 'application/json');
xhr.setRequestHeader('Accept', '*/*');
xhr.setRequestHeader('Host', 'api.thingboot.com');
xhr.setRequestHeader('Connection', 'keep-alive');

// 设置请求完成时的回调
xhr.onload = function () {
    if (xhr.status >= 200 && xhr.status < 300) {
        console.log(JSON.stringify(JSON.parse(xhr.responseText), null, 2));
    } else {
        console.error('Error:', xhr.statusText);
    }
};

// 设置错误处理
xhr.onerror = function () {
    console.error('Request failed');
};

// 发送请求
xhr.send(postData);

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

const https = require('https');
const crypto = require('crypto');

// 定义变量
const AppID = '开发者ID'; // 替换为实际的 AppID
const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
const sign = crypto.createHash('md5').update(crypto.createHash('md5').update(AppSecret).digest('hex') + ts.toString()).digest('hex');

// 构建 URL
const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

// 请求体数据
const device = '1878'; // 替换为实际的设备 ID；可传多个[用,间隔]
const order = '{"power1":1,"power2":1}'; // 替换为实际的命令

// 构建请求体
const postData = {
	device: device, // 替换成您需要发送的设备ID；可传多个[用,间隔]
	order: order // 替换成您需要发送的指令
};

const options = {
    hostname: 'api.thingboot.com',
    path: `/${AppID}/device/control/?sign=${sign}&ts=${ts}`,
    method: 'POST',
    headers: {
        'Content-Type': 'application/json',
    }
};

const req = https.request(options, (res) => {
    let chunks = [];

    res.on('data', (chunk) => {
        chunks.push(chunk);
    });

    res.on('end', () => {
        const body = Buffer.concat(chunks).toString();
        console.log(body);
    });
});

req.on('error', (error) => {
    console.error(error);
});

req.write(postData);
req.end();

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

//首先，确保你已经安装了 request 库。如果没有安装，可以通过以下命令安装： npm install request

const request = require('request');
const crypto = require('crypto');

// 定义变量
const AppID = '开发者ID'; // 替换为实际的 AppID
const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
const sign = crypto.createHash('md5').update(crypto.createHash('md5').update(AppSecret).digest('hex') + ts.toString()).digest('hex');

// 构建 URL
const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

// 请求体数据
const device = '1878'; // 替换为实际的设备 ID；可传多个[用,间隔]
const order = '{"power1":1,"power2":1}'; // 替换为实际的命令

// 构建请求体
const postData = {
	device: device, // 替换成您需要发送的设备ID；可传多个[用,间隔]
	order: order // 替换成您需要发送的指令
};

const options = {
    method: 'POST',
    url: url,
    headers: {
        'Content-Type': 'application/json'
    },
    body: postData
};

request(options, function (error, response, body) {
    if (error) throw new Error(error);
    console.log(body);
});

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

const unirest = require('unirest');
const crypto = require('crypto');

// 定义变量
const AppID = '开发者ID'; // 替换为实际的 AppID
const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
const ts = Math.floor(Date.now() / 1000); // 获取当前时间戳（秒）

// 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
const sign = crypto.createHash('md5').update(crypto.createHash('md5').update(AppSecret).digest('hex') + ts.toString()).digest('hex');

// 构建 URL
const url = `https://api.thingboot.com/${AppID}/device/control/?sign=${sign}&ts=${ts}`;

// 请求体数据
const device = '1878'; // 替换为实际的设备 ID；可传多个[用,间隔]
const order = '{"power1":1,"power2":1}'; // 替换为实际的命令

// 构建请求体
const postData = {
	device: device, // 替换成您需要发送的设备ID；可传多个[用,间隔]
	order: order // 替换成您需要发送的指令
};

unirest.post(url)
    .headers({
        'Content-Type': 'application/json'
    })
    .send(postData)
    .end(function (response) {
        if (response.error) {
            console.error(response.error);
        } else {
            console.log(response.body);
        }
    });

/*
  核心请求地址：https://api.thingboot.com/拼接AppID的值/device/control/?sign=拼接签名&拼接时间戳也就是ts
  ts时间戳获取当前时间戳即可，签名为md5(md5(开发者密码)拼接上面的ts时间戳的值)
  multipart/form-data 请求中传递参数device_id和order即可
  Tip：一定要替换成正式的AppID和AppSecret，再根据实时的时间戳计算签名，请求一定需要device_id设备ID和order命令
*/


var http = require("http");
var requestInfo={
    "method": "POST",
    "hostname": "api.thingboot.com",
    "path": "/{AppID}/device/control/",
    "headers": {
        "X-APISpace-Token":"",
        "Content-Type":""
   }
};

var req = http.request(requestInfo, function (res) {
    var chunks = [];

    res.on("data", function (chunk) {
        chunks.push(chunk);
    });

    res.on("end", function () {
        var body = Buffer.concat(chunks);
        console.log(body.toString());
    });
});

req.write("device=设备ID&order=命令");
/*
First you need to prepare the following values
1. AppID (in your console development settings)
2. AppSecret (in your console development settings)
3. ts (timestamp of the current time, seconds)
4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
Request needs to pass two parameters device and order:
device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
order[json string]: the command to be issued, for example:
{"power":1}, usually to connect the circuit of the switch
{"power3":0}, usually to close the third line of the switch or controller
{"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command
*/

req.end();

/*
First you need to prepare the following values
1. AppID (in your console development settings)
2. AppSecret (in your console development settings)
3. ts (timestamp of the current time, seconds)
4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
Request needs to pass two parameters device and order:
device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
order[json string]: the command to be issued, for example:
{"power":1}, usually to connect the circuit of the switch
{"power3":0}, usually to close the third line of the switch or controller
{"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command
*/
// 在页面的 JS 文件中（如 pages/index/index.js）
Page({
  data: {},
 
  // 控制设备的方法
  controlDevice() {
    const AppID = '开发者ID'; // 替换为实际的 AppID
    const AppSecret = '开发者密码'; // 替换为实际的 AppSecret
    const ts = Math.floor(Date.now() / 1000); // 秒级时间戳（取整）

    // 生成签名：md5(md5(AppSecret) + ts)
    const sign = this.generateSign(AppSecret, ts);

    // 构建 URL（注意：小程序要求域名必须在小程序后台配置合法）
    const url = `https://api.thingboot.com/${encodeURIComponent(AppID)}/device/control/?sign=${sign}&ts=${ts}`;

    // 请求体数据
    const device = '1878'; // 目标设备 ID
    const order = '{"power1":1}'; // 控制命令

    // 验证 JSON 合法性
    let orderDecoded;
    try {
      orderDecoded = JSON.parse(order);
    } catch (e) {
      console.error('Invalid order JSON:', e);
      return;
    }

    // 发起请求
    wx.request({
      url: url,
      method: 'POST',
      data: {
        device: device,
        order: orderDecoded
      },
      header: {
        'Content-Type': 'application/json' // 设置请求头为 JSON
      },
      success: (res) => {
        console.log('请求成功:', res.data);
        wx.showToast({ title: '操作成功', icon: 'success' });
      },
      fail: (err) => {
        console.error('请求失败:', err);
        wx.showToast({ title: '请求失败', icon: 'error' });
      }
    });
  },

  // 生成签名的方法（小程序环境没有原生 MD5，需引入第三方库或使用后端生成）
  generateSign(AppSecret, ts) {
    // 注意：小程序环境无法直接使用 PHP 的 md5()，需通过以下方式解决：
    // 1. 使用后端接口生成签名（推荐）
    // 2. 引入第三方 JS MD5 库（如 js-md5）
    
    // 示例：假设已引入 js-md5 库（需在 app.js 或页面中引入）
    const md5 = require('js-md5'); // 或通过 npm 安装
    const sign = md5(md5(AppSecret) + ts);
    return sign;
  },

  // 用户点击按钮时触发
  onTapControl() {
    this.controlDevice();
  }
});

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。