怎么用Ruby语言控制智能红外遥控器

2025-06-28 发布浏览：314 次

本文介绍了如何用 Ruby 对接智能红外遥控器的方法：可以通过接口实现。

智能红外遥控器

更多...

支持命令

开关	power
模式	mode
温度	degree
风速	speed
风向	swing
蜂鸣	beep
灯光	light

产品手册

版本	对应产品手册
红外遥控器	《智能红外遥控器产品手册》
空调遥控器	《智能空调遥控器产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

require 'net/http'
require 'json'
require 'digest/md5'

# First you need to prepare the following values
# 1. AppID (in your console development settings)
# 2. AppSecret (in your console development settings)
# 3. ts (timestamp of the current time, seconds)
# 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
# In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
# Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
# Request needs to pass two parameters device and order:
# device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
# order[json string]: the command to be issued, for example:
# {"power":1}, usually to connect the circuit of the switch
# {"power3":0}, usually to close the third line of the switch or controller
# {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
# The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
# Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

# 配置参数
app_id = '开发者ID' # 替换为实际的 AppID
app_secret = '开发者密码' # 替换为实际的 AppSecret
device = '1878' # 替换为实际的设备ID；可传多个[用,间隔]
order = '{"power1":1}' # 替换为实际的命令

# 计算时间戳
ts = Time.now.to_i

# 计算 MD5 哈希值
md5_hash = Digest::MD5.hexdigest(app_secret)

# 计算 sign
sign_input = md5_hash + ts.to_s
sign = Digest::MD5.hexdigest(sign_input)

# 构造请求 URL
url = "https://api.thingboot.com/#{app_id}/device/control/?sign=#{sign}&ts=#{ts}"
uri = URI.parse(url)

# 构造请求体
request_body = {
  device: device,
  order: JSON.parse(order)
}.to_json

# 创建 HTTP 请求
request = Net::HTTP::Post.new(uri)
request['Content-Type'] = 'application/json'
request.body = request_body

# 发送请求
response = Net::HTTP.start(uri.host, uri.port, use_ssl: true) do |http|
  http.request(request)
end

# 输出响应
puts response.body

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。

怎么用Ruby语言控制智能红外遥控器

智能红外遥控器

支持命令

产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

文章：

怎么用Ruby语言控制智能红外遥控器

相关技术文章：

如何用Ruby语言控制10W 户外防水语音音柱

怎样用Ruby语言控制吸顶安装人体感应器

如何用Ruby语言控制智能通断器DC-10A

如何用Ruby语言对接2路照明开关

怎么用Ruby语言控制60W 云远程语音音柱

Please contact me

智能红外遥控器

支持命令

产品手册

HTTP接口控制 以设备控制（向设备下发命令）为例

文章：

怎么用Ruby语言控制智能红外遥控器

相关技术文章：

如何用Ruby语言控制10W 户外防水语音音柱

怎样用Ruby语言控制吸顶安装人体感应器

如何用Ruby语言控制智能通断器DC-10A

如何用Ruby语言对接2路照明开关

怎么用Ruby语言控制60W 云远程语音音柱

HTTP接口控制以设备控制（向设备下发命令）为例