怎样用HTTP接口控制照明

2022-07-24 发布浏览：374 次

本文介绍了如何用 HTTP 对接智能灯座的方法：可以通过接口实现。

智能灯座

更多...

支持命令

线路	power
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

POST  /{AppID}/device/control/sign={sign}&ts={ts} HTTP/1.1
Host: api.thingboot.com
X-APISpace-Token:
Content-Type:

/*
First you need to prepare the following values
1. AppID (in your console development settings)
2. AppSecret (in your console development settings)
3. ts (timestamp of the current time, seconds)
4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
Request needs to pass two parameters device and order:
device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
order[json string]: the command to be issued, for example:
{"power":1}, usually to connect the circuit of the switch
{"power3":0}, usually to close the third line of the switch or controller
{"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command
$appId = '开发者ID'; // 替换为实际的 AppID
$appSecret = '开发者密码'; // 替换为实际的 AppSecret
$ts = time();
$sign = md5(md5($AppSecret) . $ts); //md5(md5(开发者密码)拼接上面的ts参数)
$url = 'https://api.thingboot.com/{AppID}/device/control/?sign={sign}&ts={ts}';
AppID=qtyVWcgeMq
sign = c484eb97ee288572db7828c6071dd88f
ts = 1747212640
device=设备ID
order=命令
*/

POST /qtyVWcgeMq/device/control/?sign=c484eb97ee288572db7828c6071dd88f&ts=1747212640 HTTP/1.1
Host: api.thingboot.com
User-Agent: Your-User-Agent
Accept: application/json
Content-Type: application/json
Content-Length: 42
 
{
    "device": "1878",
    "order": {"power1": 1}
}

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。

怎样用HTTP接口控制照明

智能灯座

支持命令

产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

文章：

怎样用HTTP接口控制照明

相关技术文章：

怎样用HTTP接口控制2路远程控制墙壁开关

如何用HTTP接口控制50A带计量

如何用HTTP接口控制60W 定时语音播报音柱

如何用HTTP接口对接DC-10A 线路控制器

怎么用HTTP接口对接16A 86型智能电源控制插座

Please contact me

智能灯座

支持命令

产品手册

HTTP接口控制 以设备控制（向设备下发命令）为例

文章：

怎样用HTTP接口控制照明

相关技术文章：

怎样用HTTP接口控制2路远程控制墙壁开关

如何用HTTP接口控制50A带计量

如何用HTTP接口控制60W 定时语音播报音柱

如何用HTTP接口对接DC-10A 线路控制器

怎么用HTTP接口对接16A 86型智能电源控制插座

HTTP接口控制以设备控制（向设备下发命令）为例