怎样用Python语言对接8路包间智能远程控制器

2026-04-26 发布浏览：817 次

本文介绍了如何用 Python 对接智能包间控制器|Max 的方法：可以通过接口实现HTTP接口远程独立控制通断、多路输出设备电源控制、照明换气扇电源控制、麻将机设备电源控制、空调电源控制、门禁电磁锁接口控制、语音播报TTS远程通知、定时任务设置、自定义联动操作、8 路独立线路通断控制、包间灯光空调一键开启、包间设备远程状态监测、包间预约联动通电、定时关闭包间电源、8 路设备场景模式切换、包间灯光亮度远程调节、包间设备故障自动告警、包间用电安全过载保护、多包间批量开关控制、包间设备运行时长统计、远程重置包间设备状态、包间清洁模式一键切换、包间设备分组独立管理、包间温湿度联动控制、包间消费时长电源联动、包间设备能耗数据分析、包间智能语音联动控制、包间门禁系统联动管理、包间设备异常断电保护。

智能包间控制器|Max

服务型门店包间专用，二代升级版本，更大功率输出；

广泛应用于共享棋牌室、茶室、休息室、舞蹈练习室、琴房、沐浴房等场景；

第1、2、3路为10A开关，或接照明或换气扇、吸烟灯等电器；

第4、5、6路为16A插座接口，可接饮水机、麻将机、按摩仪等电器；

第7路为10A门禁电磁锁接口，可接任何直流电磁锁和电插锁；

第8路为30A插座接口，可接2匹空调；

共提供8路输出，可完全覆盖包间内所有电器；

所有线路（输出接口）均可通过HTTP接口远程独立控制通断；

TTS版本支持远程语音播报，可用在订单提醒或服务说明；

支持远程定时任务，支持自定义联动操作；

更多...

适用场景

共享棋牌室包间控制、共享茶室包间控制、共享自习室包间管理、共享台球室包间控制、舞蹈练习室设备管理、琴房设备控制、沐浴房场景控制、门店包间设备电源管理、无人值守包间设备控制、线下服务门店包间管理、KTV 包间设备集中控制、私人影院包间场景、网咖电竞包间管理、棋牌室包间电源控制、共享茶室包间预约联动、共享自习室独立包间控制、酒店客房包间场景、足浴按摩店包间控制、餐厅独立包间灯光管理、剧本杀密室包间场景、轰趴馆多功能包间控制、企业会议室包间管理、录音棚隔音包间控制、直播间独立包间场景、VR 体验馆包间设备控制、台球厅 VIP 包间管理、私人 K 歌房包间控制、洗浴中心休息包间场景、月子中心独立包间控制、高端会所包间设备管理、健身房私教包间控制、共享办公独立包间场景、电竞酒店包间联动控制、主题酒店特色包间管理、无人值守自助包间控制中

支持命令

线路1	power1
线路2	power2
线路3	power3
线路4	power4
线路5	power5
线路6	power6
线路7	power7
线路8	power8
批量控制	batch
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册
语音播报:不带	《智能包间控制器Max产品手册》
语音播报:带	《智能包间控制器Max[TTS版]产品手册》

HTTP接口控制以设备控制（向设备下发命令）为例

# First you need to prepare the following values
# 1. AppID (in your console development settings)
# 2. AppSecret (in your console development settings)
# 3. ts (timestamp of the current time, seconds)
# 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
# In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
# Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
# Request needs to pass two parameters device and order:
# device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
# order[json string]: the command to be issued, for example:
# {"power":1}, usually to connect the circuit of the switch
# {"power3":0}, usually to close the third line of the switch or controller
# {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
# The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
# Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

import hashlib
import json
import http.client
import time
from urllib.parse import urlencode

def calculate_md5(s):
    return hashlib.md5(s.encode()).hexdigest()

def send_request():
    app_id = "开发者ID"  # 替换为实际的 AppID
    app_secret = "开发者密码"  # 替换为实际的 AppSecret
    ts = int(time.time())  # 获取当前时间戳（秒）

    # 计算签名  md5(md5(开发者密码)拼接上面的ts参数)
    sign = calculate_md5(calculate_md5(app_secret) + str(ts))

    # 构建 URL
    base_url = f"https://api.thingboot.com/{app_id}/device/control/"
    params = {
        "sign": sign,
        "ts": ts
    }

    # 构建请求体数据
    device = "1878"  # 替换为实际的设备ID；可传多个[用,间隔]
    order = {"power1": 1}  # 替换为实际的命令

    request_body = {
        "device": device,
        "order": order
    }

    json_body = json.dumps(request_body)

    # 创建请求
    conn = http.client.HTTPSConnection("api.thingboot.com")
    headers = {
        "Content-Type": "application/json"
    }

    # 发送请求
    conn.request("POST", f"/{app_id}/device/control/?{urlencode(params)}", json_body, headers)

    # 获取响应
    response = conn.getresponse()
    response_data = response.read().decode('utf-8')

    print("Response Status Code:", response.status)
    print("Response Body:", response_data)

    conn.close()

# 调用函数
send_request()

# First you need to prepare the following values
# 1. AppID (in your console development settings)
# 2. AppSecret (in your console development settings)
# 3. ts (timestamp of the current time, seconds)
# 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
# In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
# Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
# Request needs to pass two parameters device and order:
# device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
# order[json string]: the command to be issued, for example:
# {"power":1}, usually to connect the circuit of the switch
# {"power3":0}, usually to close the third line of the switch or controller
# {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
# The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
# Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

import hashlib
import json
import requests
import time
from urllib.parse import urlencode

def calculate_md5(s):
    return hashlib.md5(s.encode()).hexdigest()

def send_request():
    app_id = "开发者ID"  # 替换为实际的 AppID
    app_secret = "开发者密码"  # 替换为实际的 AppSecret
    ts = int(time.time())  # 获取当前时间戳（秒）

    # 计算签名 md5(md5(开发者密码)拼接上面的ts参数)
    sign = calculate_md5(calculate_md5(app_secret) + str(ts))

    # 构建 URL
    base_url = f"https://api.thingboot.com/{app_id}/device/control/"
    params = {
        "sign": sign,
        "ts": ts
    }

    # 构建请求体数据
    device = "1878"  # 替换为实际的设备ID；可传多个[用,间隔]
    order = {"power1": 1}  # 替换为实际的命令

    request_body = {
        "device": device,
        "order": order
    }

    # 发送请求
    response = requests.post(
        base_url,
        params=params,
        json=request_body,
        headers={"Content-Type": "application/json"}
    )

    # 输出响应
    print("Response Status Code:", response.status_code)
    print("Response Body:", response.text)

# 调用函数
send_request()

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。