怎么用Objective-C语言控制灯光

2023-12-27 发布浏览：392 次

本文介绍了如何用 Objective-C 对接智能灯座的方法：可以通过接口实现。

智能灯座

更多...

支持命令

线路	power
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

#import <Foundation/Foundation.h>
#import <CommonCrypto/CommonDigest.h>

@interface RequestHandler : NSObject

- (void)sendRequest;

@end

@implementation RequestHandler

- (void)sendRequest {
    // 配置参数
    NSString *AppID = @"开发者ID";  // 替换为实际的 AppID
    NSString *AppSecret = @"开发者密码";  // 替换为实际的 AppSecret
    NSString *device = @"1878";  // 替换为实际的设备ID；可传多个[用,间隔]
    NSString *order = @"{\"power1\":1}";  // 替换为实际的命令

    // 计算时间戳
    uint64_t ts = (uint64_t)[[NSDate date] timeIntervalSince1970];

    // 计算 MD5 哈希值  md5(md5(开发者密码)拼接上面的ts参数)
    NSString *md5Hash = [self md5Hash:AppSecret];

    // 计算 sign
    NSString *signInput = [NSString stringWithFormat:@"%@%llu", md5Hash, ts];
    NSString *sign = [self md5Hash:signInput];

    // 构造请求 URL
    NSString *urlString = [NSString stringWithFormat:@"https://api.thingboot.com/%@/device/control/?sign=%@&ts=%llu", AppID, sign, ts];
    NSURL *url = [NSURL URLWithString:urlString];

    // 构造请求体
    NSDictionary *requestBody = @{
        @"device": device,
        @"order": [self jsonObjectFromString:order]
    };

    // 转换为 JSON 数据
    NSError *error;
    NSData *jsonData = [NSJSONSerialization dataWithJSONObject:requestBody options:0 error:&error];
    if (error) {
        NSLog(@"Error creating JSON: %@", error);
        return;
    }

    // 创建请求
    NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:url];
    [request setHTTPMethod:@"POST"];
    [request setValue:@"application/json" forHTTPHeaderField:@"Content-Type"];
    [request setHTTPBody:jsonData];

    // 发送请求
    NSURLSession *session = [NSURLSession sharedSession];
    NSURLSessionDataTask *dataTask = [session dataTaskWithRequest:request completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
        if (error) {
            NSLog(@"Error: %@", error);
            return;
        }

        NSString *responseString = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
        NSLog(@"Response: %@", responseString);
    }];

    [dataTask resume];
}

// 计算 MD5 哈希值
- (NSString *)md5Hash:(NSString *)input {
    const char *cStr = [input UTF8String];
    unsigned char digest[CC_MD5_DIGEST_LENGTH];
    CC_MD5(cStr, (CC_LONG)strlen(cStr), digest);

    NSMutableString *output = [NSMutableString stringWithCapacity:CC_MD5_DIGEST_LENGTH * 2];
    for (int i = 0; i < CC_MD5_DIGEST_LENGTH; i++) {
        [output appendFormat:@"x", digest[i]];
    }

    return output;
}

// 将 JSON 字符串转换为 JSON 对象
- (id)jsonObjectFromString:(NSString *)jsonString {
    NSData *jsonData = [jsonString dataUsingEncoding:NSUTF8StringEncoding];
    NSError *error;
    id jsonObject = [NSJSONSerialization JSONObjectWithData:jsonData options:0 error:&error];
    if (error) {
        NSLog(@"Error parsing JSON: %@", error);
        return nil;
    }
    return jsonObject;
}

@end

int main(int argc, const char * argv[]) {
    @autoreleasepool {
        RequestHandler *handler = [[RequestHandler alloc] init];
        [handler sendRequest];
    }
    return 0;
}

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。

怎么用Objective-C语言控制灯光

智能灯座

支持命令

产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

文章：

怎么用Objective-C语言控制灯光

相关技术文章：

如何用Objective-C语言对接单路远程控制墙壁开关

怎么用Objective-C语言控制16A 3孔国标智能插座

怎样用Objective-C语言对接16A 86型定时开关插座

怎么用Objective-C语言对接智能壁挂Pro云语音播报器

怎么用Objective-C语言控制1路墙壁智能开关

Please contact me

智能灯座

支持命令

产品手册

HTTP接口控制 以设备控制（向设备下发命令）为例

文章：

怎么用Objective-C语言控制灯光

相关技术文章：

如何用Objective-C语言对接单路远程控制墙壁开关

怎么用Objective-C语言控制16A 3孔国标智能插座

怎样用Objective-C语言对接16A 86型定时开关插座

怎么用Objective-C语言对接智能壁挂Pro云语音播报器

怎么用Objective-C语言控制1路墙壁智能开关

HTTP接口控制以设备控制（向设备下发命令）为例