怎么用Swift语言控制10A定时智能插座

2026-04-30 发布浏览：668 次

本文介绍了如何用 Swift 对接智能插座2-10A|智能插座2-10A 的方法：可以通过接口实现单路设备电源控制、远程控制设备电源、定时开关设备电源、设备电源状态监测、远程打开关闭设备电源、设备电源通断控制、设备用电定时管控。

智能插座2-10A|智能插座2-10A

更多...

适用场景

设备智能改造、自动售货柜电源控制、灯光控制、照明控制、便利店灯光控制、店铺招牌控制、展柜设备电源控制、仓储照明控制、楼宇公共照明、弱电间设备管理、民宿多设备联动、共享设备柜控制、自助储物柜控制、社区智能设施控制、机房设备控制、餐饮后厨设备控制、无人售货机控制、配电柜智能改造、工业自动化设备控制、产线设备控制、车间设备远程管理中

支持命令

线路	power
先通后断	point
先断后通	reset

产品手册

版本	对应产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

// First you need to prepare the following values
// 1. AppID (in your console development settings)
// 2. AppSecret (in your console development settings)
// 3. ts (timestamp of the current time, seconds)
// 4. YourSign = md5(md5(AppSecret)ts);(md5 is an encryption method, AppSecret is the AppSecret prepared above, ts is the timestamp prepared above, concatenate the string after the AppSecret after md5 encryption)
// In simple terms, the signature is md5(md5(your developer password)concatenate the above ts timestamp value); ts is the timestamp of the current timestamp; that is, to perform one MD5 on the developer password (AppSecret), then concatenate the timestamp, and then perform one MD5 on the entire concatenated string
// Core request address: api.thingboot.com/AppID/device/control/?sign=YourSign&&ts=ts;
// Request needs to pass two parameters device and order:
// device[string]: unique device ID, can pass multiple [separated by ,], can be viewed in the console, or pulled through the interface
// order[json string]: the command to be issued, for example:
// {"power":1}, usually to connect the circuit of the switch
// {"power3":0}, usually to close the third line of the switch or controller
// {"play:gbk:16":"hello, welcome to visit"}, let the voice speaker report the specified content
// The same type of product, the command is the same, different product types of commands, please view the product manual page of each product
// Note: you must replace the formal AppID and AppSecret with real-time timestamp calculation of the signature, the request must have device device ID and order command

import Foundation
import CommonCrypto

func calculateMD5(string: String) -> String {
    let length = Int(CC_MD5_DIGEST_LENGTH)
    var digest = [UInt8](repeating: 0, count: length)
    if let data = string.data(using: String.Encoding.utf8) {
        _ = data.withUnsafeBytes { (bytes: UnsafeRawBufferPointer) -> Void in
            CC_MD5(bytes.baseAddress, CC_LONG(data.count), &digest)
        }
    }
    var digestHex = ""
    for index in 0..<length {
        digestHex += String(format: "x", digest[index])
    }
    return digestHex
}

func sendRequest() {
    let AppID = "开发者ID" // 替换为实际的 AppID
    let AppSecret = "开发者密码" // 替换为实际的 AppSecret
    let ts = Int(Date().timeIntervalSince1970) // 获取当前时间戳（秒）
 
    // 计算签名  md5(md5(开发者密码)拼接上面的ts参数)
    let sign = calculateMD5(string: calculateMD5(string: AppSecret) + String(ts))

    // 构建 URL
    let urlString = "https://api.thingboot.com/\(AppID)/device/control/?sign=\(sign)&ts=\(ts)"
    guard let url = URL(string: urlString) else {
        print("Invalid URL")
        return
    }

    // 请求体数据
    let device = "1878" // 替换为实际的设备ID；可传多个[用,间隔]
    let order = "{\"power1\":1}" // 替换为实际的命令

    // 构建请求体
    let postData = "{\"device\":\"\(device)\",\"order\":\(order)}".data(using: .utf8)!

    // 创建请求
    var request = URLRequest(url: url)
    request.httpMethod = "POST"
    request.setValue("application/json", forHTTPHeaderField: "Content-Type")
    request.httpBody = postData

    // 发送请求
    let task = URLSession.shared.dataTask(with: request) { data, response, error in
        if let error = error {
            print("Error: \(error.localizedDescription)")
            return
        }

        if let httpResponse = response as? HTTPURLResponse {
            print("HTTP Response Status Code: \(httpResponse.statusCode)")
        }

        if let data = data, let responseString = String(data: data, encoding: .utf8) {
            print("Response: \(responseString)")
        }
    }

    task.resume()
}

// 调用函数
sendRequest()

说明：{AppID}为您的应用ID（由平台生成），免费注册登录后，可在控制台查看；sign和ts的取值，请参考文档。

怎么用Swift语言控制10A定时智能插座

智能插座2-10A|智能插座2-10A

适用场景

支持命令

产品手册

HTTP接口控制以设备控制（向设备下发命令）为例

文章：

怎么用Swift语言控制10A定时智能插座

相关技术文章：

怎么用Swift语言对接30W壁挂语音通知音箱

怎么用Swift语言控制智能通用控制器|24路

如何用Swift语言对接3路2灯1控复合开关

怎样用Swift语言对接智能 20W 壁挂远程控制语音音箱

如何用Swift语言控制10A 86型定时开关插座

Please contact me

智能插座2-10A|智能插座2-10A

适用场景

支持命令

产品手册

HTTP接口控制 以设备控制（向设备下发命令）为例

文章：

怎么用Swift语言控制10A定时智能插座

相关技术文章：

怎么用Swift语言对接30W壁挂语音通知音箱

怎么用Swift语言控制智能通用控制器|24路

如何用Swift语言对接3路2灯1控复合开关

怎样用Swift语言对接智能 20W 壁挂远程控制语音音箱

如何用Swift语言控制10A 86型定时开关插座

HTTP接口控制以设备控制（向设备下发命令）为例