Check the device is network-connected and marked online on console prior to config delivery.
Start access
5.1 Device Configuration Delivery API
5.2 Supports parameter configuration

5.1 Device Configuration Delivery API

Interface address：
https://api.thingboot.com/{AppID}/device/config/?sign={sign}&ts={ts}
{AppID} is your application ID (generated by the platform)Please enter the console, in the development settings page to view.
{sign} and {ts} algorithm, please see the description in the previous section
Request data： 
{
	"device":820720,
	"config":{"relay1":"1"}
}
Request method: POST; Data format: JSON
This command delivers the configuration parameter under to with ID 820720
For more configuration parameters, please refer to section4.2 Supports parameter configurationbelow

5.2 Supports parameter configuration

5.2.1 Product config
Config Name Content Description
relay1 通 {"relay1":"1"}
断 {"relay1":"0"}
action1 状态反转 {"action1":"reverse"}
先断后通 {"action1":"reset"}
先通后断 {"action1":"point"}
禁用 {"action1":"disable"}
time1 1秒 {"time1":"1000"}
2秒 {"time1":"2000"}
3秒 {"time1":"3000"}
4秒 {"time1":"4000"}
5秒 {"time1":"5000"}
metering_interval 5秒 {"metering_interval":"5"}
10秒 {"metering_interval":"10"}
20秒 {"metering_interval":"20"}
30秒 {"metering_interval":"30"}
60秒 {"metering_interval":"60"}
metering_boot 开机后马上开始 {"metering_boot":"1"}
通过命令开始 {"metering_boot":"0"}