Development debugging phase network
Use the mobile open hotspot to network equipment

Official use scene device network

Open the mobile hotspot, change the name of the hotspot to tb-your workbench ID;Your workbench ID console right upper corner view

If your workbench ID is XXXX, then change the name of the hotspot to: tb-XXXX;

Password set to: 12345678

Please setMobile hotspot：
Hotspot name：
tb-XXXX
Hotspot password：
12345678

Note: mobile open hotspot frequency must be 2.4G，If the device is not successfully networked for a long time, try to disconnect the device and reconnect the power to wait for the device to network itself, or use other mobile phones to connect this hotspot to try whether it can be connected to the network

When the device needs to enter the debugging mode, through this way to network, the device will return to the cloud platform, and can be debugged

Open the mobile phone hotspot, change the name of the hotspot to tb;When the device is connected to the network in debugging mode, the device will ignore the private configuration information

Password set to: 12345678

Please setMobile hotspot：
Hotspot name：
tb
Hotspot password：
12345678

Note: mobile open hotspot frequency must be 2.4G，If the device is not successfully networked for a long time, try to disconnect the device and reconnect the power to wait for the device to network itself, or use other mobile phones to connect this hotspot to try whether it can be connected to the network

APP is under development, expected to be released on 2025.12.15...
Terminal client network
Use the ThingBoot app to network equipment
APP is under development, expected to be released on 2026.6.18...
Please contact the engineer to get the code